Plumbing & Heating in Luton

Most jobs are small but annoying. Think of a dripping tap, a leak under the sink or a radiator that stays cold at the top.

We also fit new radiators, swap old valves for thermostatic ones and fix leaks on heating pipes. Landlords can have small jobs done at the same visit as a gas safety check.

A radiator that is cold at the top usually has air trapped inside. Bleeding it lets the air out, and the heat comes back.

If some rooms are warm and others stay cold, the system may need balancing. That means setting each valve so hot water reaches every radiator evenly. A cold patch at the bottom often points to sludge.

Even a slow drip wastes water and can damage floors and ceilings over time. If you can see water coming through, turn off the stopcock and call us.

Our engineer finds where the water is coming from and fixes it. While they are there, they check the rest of the pipe run for weak spots.

Thermostatic radiator valves let you set each room to the heat you want. They can help cut gas use in rooms you rarely sit in.

Replacing an old or rusty radiator? We fit the new one, refill and bleed the system, and check every joint for leaks before we leave.